Quick Setting Toolbar In Live View Mode - Nuvico HDoCS DT_E/P Instruction Manual

Table of Contents

Advertisement

3.2.4 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you point the mouse to the
bottom of the screen.
Table 3. 5 Description of Quick Setting Toolbar Icons
Icons
Description
Enable/Disable
Manual Record
PTZ Control
Close Live View
Instant Playback only shows the record in last five minutes. If no record is found, it means there is no
record during the last five minutes.
Digital Zoom can zoom in the selected area to the full screen. Click and draw to select the area to zoom in.
Image Settings icon can be selected to enter the Image Settings menu.
Four modes are selectable according to the real situation:
Standard: for general lighting conditions (default).
Indoor: the image is relatively smoother.
Dim Light: the image is smoother than the other two modes.
Outdoor: the image is relatively clearer and sharper. The degree of contrast and saturation is high.
You can adjust the image parameters, including brightness, contrast, saturation, hue, sharpness and denoising. You
can also click Default to restore the default settings and click Copy to copy the image settings to other analog
cameras
Figure 3. 3 Quick Setting Toolbar
Icons
Description
Instant Playback
Digital Zoom
24
Icons
Description
Mute/Audio on
Image Settings

Advertisement

Table of Contents
loading

Table of Contents