Live View - Nuvico HDoCS DT-P1620 Setup Manual

Setup Guide of HDoCS Digital Video Recorder

Live View

The live view interface appears by default when you log in the device.
Interface Introduction
No. Name
Channel List
1
Live View Window
2
Play Control Bar
3
PTZ Control
4
Video Parameters
5
Configuration
Start Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the
Refer to the following table for the description of buttons on the live view window:
Icon Description
Select the window-division mode
Description
Displays the list of channels and the playing and recording status of each
channel.
Displays the image of channel, and multi-window division is supported.
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and calling.
PTZ function can only be realized if the connected camera supports PTZ
control.
Brightness, contrast, saturation and hue of the image can be edited.
button on the toolbar to start the live view of all cameras on the device list.
13
Icon Description
Previous page
NUVICO