System; General; System Id; Auto Lock - Nuvico EV-400 Instruction Manual

8. SYSTEM

System Setup allows modification of various system features such as general, time, user accounts,
disk, update, and information.

8.1 GENERAL

8.1.1 SYSTEM ID

Select the DVR's SYSTEM ID. Up to 99 DVRs can be controlled using one remote controller. To
select the DVR to be controlled with the remote controller, press and hold the DVR ID button. While
holding the DVR ID button, press the appropriate DVR ID number, and then release the DVR ID
button.
For example, enter 05 for DVR ID 05; enter 43 for DVR ID 43, and such. The default value is 00.

8.1.2 AUTO LOCK

The DVR locks all the buttons after three minutes of inactivity. The buttons can be unlocked with the
user password. The default is OFF.

8.1.3 RECORD MODE

Select the global record resolution. Values are 360 x 240 (CIF), 720 x 240 (Field) and 720 x 480
(Frame). The default is 360 x 240 (CIF).
Note: Maximum global record rate is 120 pictures per second at the resolution of 320 x 240
(CIF), 60 pictures per second at the resolution of 720 x 240 (Field), and 30 pictures per second
at the resolution of 720 x 480 (Frame).
The option "FRAME + CIF" is recorded at Frame resolution for ch1, and CIF resolution for
others.

8.1.4 PB DEINTERLACE

De-interlace picture to eliminate white interlace lines during Playback.

8.1.5 RUN ON BOOT

The DVR start the recording itself when the DVR is booting up.

8.1.6 PASSWORD

To disable the password prompt window when entering menu.

8.1.7 FACTORY DEFAULT

To restore factory default settings, stop recording and select the START option.
- 59 -