Quick Setup; Date/Time; Global Record - Nuvico AP-C1600 User Manual

I. QUICK SETUP
When the DVR is powered on for the very first time, the time and date may be incorrect. Before any
other operation of the Digital Video Recorder, it is important to setup the time and the date.
Directional buttons are used to navigate through all the main categories and their submenus. ENTER
button is used to access and to save the settings and to change the values in certain sub-menus.ESC
button is used to revert back to previous settings and exiting the submenus without saving any changes.
A. DATE/TIME
B. GLOBAL RECORD
The DVR is set with predefined record settings on initial power-up. The unit will start recording
immediately. Please note that the default recording setting is ON. The factory default setting is NORMAL
recording as follow:
ALL CHANNELS
AP-C1600
AP-D1600
AP-F3200
Revision 6.0
To adjust the date & time, stop the recording first.
Go to the MENU then select QUICK SETUP. Under the
DATE/TIME tab.
Set appropriate time zone, daylight saving option, date, and time.
Select SAVE to apply new values.
When finished, exit from the Menu then press the Record button
to start recording.
USE RESOLUTION
ON CIF
ON FIELD
ON FIELD
PPS QUALITY
7 Q5
15 Q5
7 Q5
19
MOTION
OFF
OFF
OFF
APEX SERIES DVR