Configuring Advanced Settings; Configuring Pppoe Settings - Nuvico HDoCS DT_E/P Instruction Manual

9.2 Configuring Advanced Settings

9.2.1 Configuring PPPoE Settings

The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the PPPoE tab to enter the PPPoE Settings interface.
3. Check the PPPoE checkbox to enable this feature.
4. Enter User Name and Password for PPPoE access.
NOTE
The User Name and Password should be assigned by your ISP.
5. Click the Apply button to save the settings.
6. After successful settings, the system asks you to reboot the device to enable the new settings, and the
PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status of PPPoE
connection.
Configuring DDNS
Nuvico offers a free DDNS service and it doesn't require any configuration.
.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the DDNS tab to enter the DDNS Settings interface.
3. Check the DDNS checkbox to enable this feature.
NOTE.
Please don't change or delete the username and password.
73