Supermicro Sys-5049A-Tr - Matrox Mura IPX Series System Builder's Manual

Supermicro SYS-5049A-TR

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
CPUSLOT1PCI-E3.0x16
CPUSLOT2PCI-E3.0x8
CPUSLOT3PCI-E3.0x16
CPUSLOT4PCI-E3.0x8
CPUSLOT5PCI-E3.0x16
CPUSLOT6PCI-E3.0x8
CPUSLOT7PCI-E3.0x16
Performance considerations with D-Series controller
Slot
CPUSLOT1PCI-E3.0x16
CPUSLOT2PCI-E3.0x8
CPUSLOT3PCI-E3.0x16
CPUSLOT4PCI-E3.0x8
CPUSLOT5PCI-E3.0x16
CPUSLOT6PCI-E3.0x8
CPUSLOT7PCI-E3.0x16
Note: * The D-Series bandwidth is reduced to 6 GB/s instead of 12 GB/s when shared slots are used. However, the performance depends on
the layout, the number of streams going to each D-Series, rendering done, and the intended usage. Shared slots are 2&3, 4&5, and 6&7.
D-Series based controllers
Yes
7
6
4
X11SPA-T
Intel C621
Intel® Xeon Silver 4208 CPU @ 2.10 GHz
LGA 3647
3.3
32 GB DDR4 ECC-RDIMM
4U
2200 W redundant power supply
4 PCIe x16 3.0 slots (x16 electrical and mechanical)
3 PCIe x16 3.0 slots (x8 electrical, x16 mechanical)

The system fan speed must be set to

Optional rack-mount kit mounting rails are available (Supermicro part#: MCP-290-00059-0B).
D-Series based controller
Main
D1480
MURAIPXI-D4JF
D1480
MURAIPXI-D4JF
D1480
MURAIPXI-D4JF
D1480
Connectivity Configuration 1
x16 B
x8 / x0 A
x16 / x8 A
x8 / x0 A
x16 / x8 A
x8 /x0 A
x16 / x8 A
Third-party based controllers
No foreseeable compatibility issues
mode in IPMI.
HeavyIO
Third-party based controller
Option Main
B Third-party graphics hardware
A MURAIPXI-D4JF
A, B Third-party graphics hardware
A MURAIPXI-D4JF
A, B Third-party graphics hardware
A MURAIPXI-D4JF
A, B Third-party graphics hardware
Configuration 2 Configuration 3
B B
A A
B* B*
A A
A B*
A A
A A
Matrox Display Wall – System Builder's Guide
Option
A
A
A
A
A
A
Configuration 4
B
A
B*
A
B*
A
B*
41