Asus Ws Z390 Pro - Matrox Mura IPX Series System Builder's Manual

ASUS WS Z390 Pro

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
PCIEX16_1
PCIEX16_2
PCIEX4_1
PCIEX16_3
PCIEX16_4
Performance considerations with D-Series controller
Slot Connectivity
PCIEX16_1 x16 x 8
PCIEX16_2 x8 / x0
PCIEX4_1 x4
PCIEX16_3 x16 / x8
PCIEX16_4 x8 / x0
62 Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
4
3
4
ASUS WS Z390 Pro
Intel Z390
Intel® Core™ I5-9600K CPU @ 3.70 GHz
Intel® Core™ I9-9900K CPU @ 3.60 GHz
LGA 1151
0701, 2019-05-24
32 GB DDR4
Chenbro RM41300-FS81
850 W (P/N:EVGA Supernova 850G3)

4 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)

1 PCIe ×4 3.0 slot

The chassis must be ordered from Chenbro. Power supply isn't included with the chassis.

The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page (EZ
 QFan Control 
mode) select
to and apply the changes.
Full Speed

Make sure you have the following settings for Above 4G Decoding. In the system BIOS main page, go to

, then set
Advanced Boot Above 4G Decoding
D-Series based controller
Main
D1480
MURAIPXI-E4JHF
N/A
D1480
MURAIPXI-E4JHF
Configuration 1 Configuration 2
B* B*
A A
N/A N/A
A B*
A A
Third-party based controllers
No foreseeable compatibility issues
select the header to which the fans are connected
to and
ON First VGA 4G Decode
Third-party based controller
Options Main
B Third-party graphics hardware
A, B MURAIPXI-E4JHF
N/A N/A
A, B Third-party graphics hardware
A, B MURAIPXI-E4JHF

change from
Standard
to .
Above_4G
Options
A
N/A
A
A