Validated Systems; Before You Begin; D1450 / D1480 Based Video Wall System - Matrox Mura IPX Series System Builder's Manual

Validated systems

The following systems have been validated by Matrox to work with the Matrox Mura IPX Series and the Matrox D-Series (D1450 and D1480)
products.
Note: Ensure that you have the following default settings to launch the Windows 10 operating system:
 In the system BIOS main page, go to
 In the system BIOS main page, go to

Before you begin

To ensure optimal performance, read the following guidelines before installing your Matrox graphics hardware.

D1450 / D1480 based video wall system

Note: Always insert your D1450 and D1480 in the PCIe® 2.0 / 3.0 ×16 slots and your Mura IPX Series cards in the PCIe® 2.0 / 3.0
×16 or ×8 slots (×16 or ×8 electrical).
Note: To avoid possible problems, we recommend you use only Matrox PowerDesk software to change your display settings. Third-
party console displays can only be used in independent mode.
 D-Series and Mura IPX Series – Insert these cards in the PCIe ×16 slots that are ×16 /×8 electrical.
 Console display – To add a console display to your D-Series based system, you can use the following graphics cards in a PCIe ×4
slot:
 Matrox M9148 LP PCIe x16
 Matrox M9140 LP PCIe x16
Matrox M9138 LP PCIe x16

 Matrox M9128 LP PCIe ×16
 Matrox M9120 Plus LP PCIe ×16
Matrox M9120 Plus LP PCIe x1

 Matrox M9120 PCIe x16
 AMD Radeon WX2100
AMD Radeon Vega 8 (onboard)

 ASPEED AST2500 (onboard)
 Intel® HD Graphics 530 (onboard)
 Intel® HD Grap hics 630 (onboard)
 Intel® UHD Graphics 630 (onboard)
NVIDIA® GeForce GT710

 NVIDIA® Quadro P600
 NVIDIA® Quadro K620
Note: Console is supported with 3.05 driver onwards.
14 Matrox Display Wall – System Builder's Guide
Boot Tab  Boot Mode Select 
Advanced Tab  Secure Boot  CSM Support 
and select .
UEFI
and select
Disable
.