Lenovo Thinkstation P520 - Matrox Mura IPX Series System Builder's Manual

Lenovo Thinkstation P520

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
SLOT1 X8 GEN3
SLOT2 X16 GEN3
SLOT3 X4 GEN3
SLOT4 X16 GEN3
SLOT5 (PCI)
SLOT6 X4 GEN3
Performance considerations with D-Series controller
Slot Connectivity
SLOT1 X8 GEN3 x8
SLOT2 X16 GEN3 x16
SLOT3 x4 GEN3 x4
SLOT4 x16 GEN3 x16
SLOT5 (PCI) -
SLOT6 x4 GEN3 x4
Note: Slot 6 PCIe lanes connect through IOH. Performance may be reduced.
34 Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
4
2
3
Lenovo P520
Intel C422
Intel Xeon W-2102 CPU, @2.90GhZ
LGA 2066
LENOVO S03KT44A, 2021-01-21
32 GB ECC RDIMM
Lenovo P520
690 W

2 PCIe x16 3.0 slots

1PCIe x8 3.0 slot

2 PCIe x4 3.0 slots
 In the system BIOS, go to
Device
 The system fan speed must be set at full speed for proper thermal ventilation. In the system BIOS, go to

Power Fan Control Stepping

In the system BIOS, go to
Advanced

The ambient temperature must not exceed 35 degrees centigrade.
D-Series based controller
Main
MURAIPXI-E4JHF
D1480
N/A
D1480
N/A
Console
Configuration 1 Configuration 2
A A
B B
N/A N/A
A B
N/A N/A
C C
Third-party based controllers
No foreseeable compatibility issues
  select
Video Setup Active Video = Auto
 select
7-Higher fan speed.
 
PCIe/PCI settings Above 4G decoding
Third-party based controller
Option Main
A MURAIPXI-E4JHF
B Third-party graphics hardware
N/A N/A
A, B Third-party graphics hardware
N/A N/A
C N/A
.
 select
.
Enabled
Option
A
-
N/A
A
N/A
N/A