Portwell M9030 (With Robo-8113Vg2Ar Shb) - Matrox Mura IPX Series System Builder's Manual

Portwell M9030 (with ROBO-8113VG2AR SHB)

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
J1
J2
J3
J4
J5
J6
J7
J8
J9
J10
36 Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
10
9
4
Portwell PBPE-11A-MT (Backplane)
Portwell ROBO-8113VG2AR (SHB)
Intel C246
Intel® Core™ i3-6100E CPU @ 3.70 GHz, 3700 MHz
LGA 1151
R1.00.E0, 2019-12-16
32 GB DDR4
4U rack-mount
950 W redundant power supply
10 PCIe x16 2.0 slots (x16 mechanical, x16 electrical)

In the system BIOS, go to
Advanced

In the system BIOS, go to
Advanced
Enabled.

In the system BIOS, go to
Advanced

The system BIOS is available at ftp://portwell_bios:xQGnkWnQ@privftp.matrox.com.

Portwell system BIOS files with "-MT" are custom BIOS versions specific to Matrox configurations.
D-Series based controller
Main
D1480
MURAIPXI-E4JHF
D1480
MURAIPXI-E4JHF
MURAIPXI-E4JHF
D1480
MURAIPXI-E4JHF
D1480
MURAIPXI-E4JHF
MURAIPXI-E4JHF
Third-party based controllers
No foreseeable compatibility issues
 
Graphics Configuration Internal Graphics
 
Chipset Configuration Above 4G MMIO BIOS Assignment
 
Chipset Configuration Above 4G Decoding
Third-party based controller
Option Main
Third-party graphics hardware
A MURAIPXI-E4JHF
A, B Third-party graphics hardware
A MURAIPXI-E4JHF
A MURAIPXI-E4JHF
A, B Third-party graphics hardware
A MURAIPXI-E4JHF
A, B Third-party graphics hardware
A MURAIPXI-E4JHF
A MURAIPXI-E4JHF
 and select
.
Disabled
 and select
 and select
.
Enabled
Option
A
A
A
A
A
A
A
A
A