Hp Zcentral 4R Workstation - Matrox Mura IPX Series System Builder's Manual

HP ZCentral 4R Workstation

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Configurations
Slot
SSR SLOT1 PCIe3x16
DSR SLOT2 PCIe3x16/8*
DSR SLOT3 PCIe3x8
Note: DSR Slot 2 operates at x8 if DSR Slot 3 is populated.
Performance considerations with D-Series controller
Slot
SSR SLOT1 PCIe3x16
DSR SLOT2 PCIe3x16/8
DSR SLOT3 PCIe3x8
Note: GPU bandwidth reduced to 6 GB/s instead of 12 GB/s when DSR Slot3 is populated.
Option Product
A MURAIPXI-E4SF, MURAIPXI-E4SHF, MURAIPXI-D2MF, MURAIPXI-D2MHF, MURAIPXI-E2MF, MURAIPXI-E2MHF,
MURAIPXI-D4JF, MURAIPXI-D4JHF, MURAIPXI-E4JF, or MURAIPXI-E4JHF
B D1450 or D1480
D-Series based controllers
Yes
3
2
3
HP ZCentral 4R WS
Intel C422
Intel Xeon W-2223 CPU, @3.60GhZ
LGA 2066R4
HP P63 v01.06, 2020-10-28
32 GB DDR4 ECC RDIMM
1U
675 W Single / Redundant PSU
Single slot riser:

1 PCIe x16 3.0 slot
Dual slot riser:

1PCIe x16 3.0 slot (x16 mechanical, x16 / x8 electrical)

1PCIe x16 3.0 slot (16 mechanical, x8 electrical)
D-Series based controller
Main
D1480
D1480
MURAIPXI-E4JHF
Connectivity Configuration 1
x16 A
x16 / 8 B
x8 N/A
Third-party based controllers
No foreseeable compatibility issues
Third-party based controller
Option Main
B Third-party graphics hardware
A, B Third-party graphics hardware
A/B MURAIPXI-E4JHF
Configuration 2
A
B*
N/A
Matrox Display Wall – System Builder's Guide
Option
-
A
A
31