Asus Pro Ws C621 64L Sage 10G - Matrox Mura IPX Series System Builder's Manual

ASUS Pro WS C621 64L SAGE 10G

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
PCIEX16_1
PCIEX16_2
PCIEX4_1
PCIEX16_3
PCIEX16_4
56 Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
4
3
4
ASUS PRO WS C621-64L SAGE/10G
Intel C621
Intel® Xeon® W-3223 CPU @ 3.50 GHz 64-lane CPU
LGA 3647
1001, 2020-02-19
32 GB DDR4 ECC-RDIMM
Chenbro RM41300 FS81
750 W (P/N: EVGA SuperNOVA 750 G3)
With 64-lane CPU

4 PCIe x16 3.0 slots (x16 mechanical and electrical)

1PCIe x8 3.0 slot
With 48-lane CPU

2 PCIe x16 3.0 slots (x16 mechanical and electrical)
 2 PCIe x16 3.0 slots (x16 mechanical and x8 electrical)

1 PCIe ×4 3.0 slot

Requires a low profile CPU cooler.

Refer to the memory AVL list provided by ASUS to use with this motherboard.

The chassis must be ordered from Chenbro. Power supply isn't included with the chassis.
The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page 

 select the header to which the chassis fans are connected  change from
Monitor
and apply the changes.

In the system BIOS main page, go to
to .
Decode Auto
D-Series based controller
Main
D1480
D1480
N/A
MURAIPXI-E4JF
MURAIPXI-E4JF
Third-party based controllers
No foreseeable compatibility issues
Advanced  Boot
, then set
Above 4G Decoding
Third-party based controller
Options Main
B Third-party graphics hardware
A, B Third-party graphics hardware
N/A N/A
A, B MURAIPXI-E4JF
A, B MURAIPXI-E4JF
to
Generic Full Speed
to and
ON First VGA 4G
Options
A
N/A
A
A