Msi Trx40 Pro 10G - Matrox Mura IPX Series System Builder's Manual

MSI TRX40 PRO 10G

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
PCI_E1: PCIe 4.0 x16
PCI_E2:PCIe 4.0 x8
PCI_E3: PCIe 4.0 x16
PCI_E4: PCIe 4.0 x1
PCI_E5: PCIe 4.0 x8
Performance considerations with D-Series controller
Slot Connectivity
PCI_E1: PCIe 4.0 x16 x16
PCI_E2:PCIe 4.0 x8* x8
PCI_E3: PCIe 4.0 x16 x16
PCI_E4: PCIe 4.0 x1 x1
PCI_E5: PCIe 4.0 x8 x8
64 Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
3
2
3
MSI TRX40 PRO 10G
AMD TRX40
AMD Ryzen™ Threadripper™ Pro 3960X @3.8 GHz
sTRX4
1.50, 3/20/2020
32 GB DDR4
Chenbro RM41300 FS81
750 W (P/N: EVGA SuperNOVA 750 G3)

4 PCIe x16 4.0 slots

The chassis must be ordered from Chenbro. Power supply isn't included with the chassis.

The chassis fans must run at full speed. To set or change the fan speed, in the system BIOS, go to
 Hardware Monitor 
and select
 Settings  Advanced  PCI Subsystem Settings  Above 4G
In the system BIOS, go to

Slot 2 (PCI_E2 PCIe 4.0 x8) cannot be used due to card detection issues.
D-Series based controller
Main
D1480
Cannot be used
D1480
N/A
MURAIPXI-E4JHF
Configuration 1
B*
A
N/A
A
A
Third-party based controllers
No foreseeable compatibility issues
.
All full Speed (f)
Third-party based controller
Options Main
B Third-party graphics hardware
- Cannot be used
A, B Third-party graphics hardware
N/A N/A
A, B MURAIPXI-E4JHF
Configuration 2
B*
N/A
B
N/A
A
Settings
and select .
Enabled
Options
-
-
A
-
A