Supermicro H11Ssl-I - Matrox Mura IPX Series System Builder's Manual

Display wall
Hide thumbs Also See for Mura IPX Series:
Table of Contents

Advertisement

Supermicro H11SSL-i

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
CPU SLOT1 PCI-E 3.0 X8
CPU SLOT2 PCI-E 3.0 X16
CPU SLOT3 PCI-E 3.0 X8
CPU SLOT4 PCI-E 3.0 X16
CPU SLOT5 PCI-E 3.0 X8
CPU SLOT6 PCI-E 3.0 X16
72
Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
4
3
3
Supermicro H11SSL-i
AMD SP3
AMD EPYC 7251 8-Core Processor, 2100 MHz
SOCKET SP3 (Supermicro Part#: SNK-P0064AP4)
1.3, 2019-06-25
32 GB DDR4
Supermicro CSE-842XTQ
600 W redundant power supply
3 PCIe x16 3.0 slots
3 PCIe ×8 3.0 slots
In the system BIOS main page, go to
.
Enabled
In the system BIOS main page, go to
to
.
Disabled
In the system BIOS main page, go to
In the system BIOS main page, go to
Requires installation of Supermicro SuperDoctor® 5 to control the fan speed. Ensure to have the fan speed
set to full speed.
Requires a low profile CPU cooler for the CPU heatsink that can be purchased from Supermicro (Part#:
SNK-P0064AP4).
Slots 3 and 5 are unusable due to mechanical conflict. The heatsink on the motherboard conflicts with the
PCIex16 add-in card gold fingers.
On-board console support with D-Series controllers. Requires 3.05 drivers or later.
D-Series based controller
Main
MURAIPXI-E4JHF
MURAIPXI-E4JHF
N/A
D1480
N/A
D1480
Third-party based controllers
No foreseeable compatibility issues
Advanced  PCIe/PCI/PnP Configuration 
Advanced  PCIe/PCI/PnP Configuration  M.2 PCIex4 OPROM 
Advanced  PCIe/PCI/PnP Configuration 
IPMI Tab  IPMI Function Support 
Third-party based controller
Options
Main
A
MURAIPXI-E4JHF
A, B
MURAIPXI-E4JHF
N/A
N/A
B
Third-party graphics hardware
N/A
N/A
A, B
Third-party graphics hardware
and set
Above 4G Decoding
and set
and set
VGA Priority to Offboard
and set to
.
Enabled
Options
A
A
N/A
A
N/A
to
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mura d-series

Table of Contents