Asus Ws C422 Pro/Se - Matrox Mura IPX Series System Builder's Manual

ASUS WS C422 PRO/SE

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
PCIEX16_1
PCIEX16_2
PCIEX4_1
PCIEX16_3
PCIEX16_4
Performance considerations with D-Series controller
Slot Connectivity
PCIEX16_1 x16
PCIEX16_2 x16
PCIEX4_1 x4
PCIEX16_3 x16 / x8
PCIEX16_4 x8 / x0
58 Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
4
3
4
ASUS WS C422 PRO/SE
Intel C422
Intel® Xeon® W-2133 CPU @ 3.60 GHz
LGA 2066 for Intel® Xeon-W series
0702, 2018-06-14
32 GB DDR4 RDIMM
Chenbro RM41300-FS81 (includes fans)
750 W (P/N: Corsair RM750x)

2 PCIe x16 3.0 slots (x16 mechanical, x16 electrical)

2 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)

1 PCIe ×4 3.0 slot (x4 mechanical, x4 electrical)

The chassis must be ordered from Chenbro. Power supply isn't included with the chassis.
 Make sure you have the following default settings for Above 4G Decoding. In the system BIOS main page,
go to , then set
Boot Above 4G Decoding

To use the on-board graphics, make sure the
install the VGA bracket cable that came with the motherboard in an empty slot and connect to the internal
VGA connector VGA_HDR1 on the motherboard.
D-Series based controller
Main
D1480
D1480
N/A
MURAIPXI-E4JF
MURAIPXI-E4JF
Configuration 1 Configuration 2
B B
A A
N/A N/A
A A
A A
Third-party based controllers
No foreseeable compatibility issues
to and to
ON First VGA 4G Decode
is set to
3-pin VGA_SW1 jumper
Third-party based controller
Options Main
Third-party graphics hardware
A, B Third-party graphics hardware
N/A N/A
A, B MURAIPXI-E4JF
A, B MURAIPXI-E4JF
Configuration 3
B
B
N/A
B*
A
.
Auto
on the motherboard. Then
Enable
Options
A
N/A
A
A