Supermicro C9Z490-PG
Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
CPU SLOT1 PCI-E 3.0 X8(IN X16)
CPU SLOT3 PCI-E 3.0 X 16
PCH SLOT4PCI-E 3.0x1
CPU SLOT5 PCI-E 3.0 X8(IN X16)
CPU SLOT7 PCI-E 3.0 X 16
Performance considerations with D-Series controller
Slot
CPU SLOT1 PCI-E 3.0 X8(IN X16)
CPU SLOT3 PCI-E 3.0 X 16
CPU SLOT5 PCI-E 3.0 X8(IN X16)
CPU SLOT7 PCI-E 3.0 X 16
Note: * The GPU bandwidth is reduced to 6 GB/s instead of 12 GB/s when shared slots are used. Shared slots are 1 & 3 and 5 & 7.
Option
Product
A
MURAIPXI-E4SF, MURAIPXI-E4SHF, MURAIPXI-D2MF, MURAIPXI-D2MHF, MURAIPXI-E2MF, MURAIPXI-E2MHF,
MURAIPXI-D4JF, MURAIPXI-D4JHF, MURAIPXI-E4JF, or MURAIPXI-E4JHF
B
D1450 or D1480
68
Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
4
3
4
Supermicro C9Z490-PG
Intel Z490
Intel® Core™ i7-10700 CPU @ 2.90 GHz
LGA 1200
1.0A, 2020-04-16
32 GB DDR4
Supermicro CSE-842XTQ-R606B
600 W redundant power supply
4 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)
The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page
Monitor Fan Control Setting
In the system BIOS main page, go to
Primary Display
to
AUTO
Internal Graphics
to
AUTO
In the system BIOS main page, go to
Above 4G MMIO BIOS Assignment
D-Series based controller
Main
D1480
MURAIPXI-E4JF
N/A
D1480
MURAIPXI-E4JF
Connectivity
Configuration 1
x16 x 8
B*
x8 / x0
A
x16 / x8
A
x8 / x0
A
Third-party based controllers
No foreseeable compatibility issues
and select
.
Full Speed
Advanced Graphics Configuration
Advanced PCIe/PCI/PnP Configuration Option ROM execution
to
.
Enabled
Third-party based controller
Options
Main
B
Third-party graphics hardware
A, B
MURAIPXI-E4JF
N/A
N/A
A, B
Third-party graphics hardware
A, B
MURAIPXI-E4JF
Configuration 2
B*
A
B*
A
H/W
and set:
and set
Options
A
N/A
A
A