Asus Pro Ws X299 Sage Ii - Matrox Mura IPX Series System Builder's Manual

ASUS Pro WS X299 SAGE II

Validated
Maximum number of cards
supported
Maximum supported
Mura IPX Series
Maximum supported
D-Series
Motherboard
Chipset
Processor
Heatsink (for CPU)
System BIOS version
System memory
Chassis
Power supply
PCIe expansion slots
Notes
Configurations
Slot
PCIEX16_1
PCIEX16_2
PCIEX16_3
PCIEX16_4
PCIEX16_5
PCIEX16_6
PCIEX16_7
52 Matrox Display Wall – System Builder's Guide
D-Series based controllers
Yes
7
6
4
ASUS Pro WS X299 SAGE II
Intel X299
Intel ®Core i9-10900X CPU @ 3.70 GHz (X-series, 48 lane CPU), or
Intel ®Core i7-9800X CPU @ 3.80 GHz (X-series 44 lane CPU), or
Intel ®Core i9-9920X CPU @3.50 GHz (X-series, 44 lane CPU)
LGA 2066
0702, 2020-06-10
32 GB DDR4
Chenbro RM41300-FS81 (includes fans)
850 W (P/N:EVGA Supernova 850G3)

7 PCIe x16 3.0 / 2.0 slots

The chassis must be ordered from Chenbro. Power supply isn't included with the chassis.

The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page (EZ
 QFan Control 
mode) select
to and apply the changes.
Full Speed

Two dust protection filters present in front of the chassis must be removed for proper system ventilation.

Ensure to have the following default settings for Above 4G Decoding. In the system BIOS, go to
Mode  Boot
, then set
Above 4G Decoding

Add-in board console support with D-Series controller. Requires 3.05 or later drivers.
D-Series based controller
Main
D1480
MURAIPXI-D4JF
D1480
MURAIPXI-D4JF
D1480
MURAIPXI-D4JF
D1480
Third-party based controllers
No foreseeable compatibility issues
select the header to which the fans are connected
to and set
ON First VGA 4G Decode
Third-party based controller
Option Main
B Third-party graphics hardware
A MURAIPXI-D4JF
A, B Third-party graphics hardware
A MURAIPXI-D4JF
A, B Third-party graphics hardware
A, C MURAIPXI-D4JF
A, B Third-party graphics hardware

change from
Standard
Advanced
to .
Above_4G
Option
A
A
A
A
A
A