Validated PCIe expansion boxes
The following PCIe expansion boxes have been validated by Matrox to work with Matrox Mura IPX Series, Matrox D1480 and Matrox D1450
products.
Note:
For improved performance, we recommend you avoid using PCIe
Currently supported PCIe expansion box
OSS 4U Value 8-Slot Expansion System
Maximum number of cards
supported
Part number
Backplane
Host / Target Adapters
Chassis
Power supply
Available PCIe expansion
slots
Notes
Expansion configurations
Slot
PCIEX16_HOST INTERFACE CARD
SLOT
PCIEX8_CARD SLOT1
PCIEX8_CARD SLOT2
PCIEX8_CARD SLOT3
PCIEX8_CARD SLOT4
PCIEX8_CARD SLOT5
PCIEX8_CARD SLOT6
PCIEX8_CARD SLOT7
PCIEX8_CARD SLOT8
74
Matrox Display Wall – System Builder's Guide
8
OSS-PCIe3-4UV-8-1
OSS-PCIe-BP-452
PCIe x16 Gen3 iPass Cable Adapters. Part#:
OSS-PCIe-HIB38-x16-T-H
OSS-PCIe-HIB38-x16-H-H
4U rack mount
Two x 2000 W load-sharing power supplies
1 PCIe x16 3.0 Host interface card slot
8 PCIe x8 3.0 Expansion slots
Insert the Host adapter (Part# OSS-PCIe-HIB38-x16-H-H) in the D-Series / Third-party controller Host
system.
Insert the Target adapter (Part# OSS-PCIe-HIB38-x16-T-H) in the PCIEx16 slot of the Expansion system.
Connect the Target and Host adapter iPass connectors via x16 iPass cable.
While using ECA EVS-XL as D-Series controller host system, insert the Host adapter in EVS-XL slot
P2PCIE2.
D-Series based controller
Main
OSS-PCIe-HIB38-x16-T-H
MURAIPXI-E4JF
MURAIPXI-E4JF
MURAIPXI-E4JF
MURAIPXI-E4JF
MURAIPXI-E4JF
MURAIPXI-E4JF
MURAIPXI-E4JF
MURAIPXI-E4JF
4 slots or lower.
®
×
Third-party based controller
Options
Main
N/A
OSS-PCIe-HIB38-x16-T-H
A
MURAIPXI-E4JF
A
MURAIPXI-E4JF
A
MURAIPXI-E4JF
A
MURAIPXI-E4JF
A
MURAIPXI-E4JF
A
MURAIPXI-E4JF
A
MURAIPXI-E4JF
A
MURAIPXI-E4JF
Options
N/A
A
A
A
A
A
A
A
A