Dispensing With The Automatic Steam Wand; Dispensing Cappuccinos - Astoria 1GR Use And Maintenance Manual

6.10.2 "SAE - DISPLAY" versions
DISPENSING HOT WATER
• Place the jug under the hot water nozzle.
• Press the water button
dispensed.
• The machine dispenses a programmed quantity of hot
water; to stop it from dispensing ahead of time, press the
hot water dispensing button
button.
PROGRAMMING THE HOT WATER
The machine is programmed by default. Should the hot water
doses need to be modified, proceed as follows:
• Place the pot under the hot water spout.
• Press the button for at least 5 seconds, until all the
dose button LEDs are lit.
• Press the hot water dispensing button
ing.
• When the desired amount of water has been reached,
press the button again to confirm the dose.
• When the programming is complete, press the
ton until all of the LEDs on the pushbutton panel go off.
6.11 Dispensing with the automatic
steam wand
6.11.1 Tips regarding its use
• Only froth the amount of milk that you intend to use; once
heated, the milk will have to be completely poured out of
the jug and cannot be reheated.
• The automatic steam wand only guarantees an accuracy
of ± 3°C between the set temperature and the actual milk
temperature, if the starting milk temperature is 4°C.
• As the steam automatically stops dispensing when the set
milk temperature is reached, only fill the jug half way in
order to prevent the milk froth from spilling out.
• Use a suitably-sized jug for the amount of milk that requires
frothing (approx. 200 ml is recommended) and make sure
that it is circular and not conical (see the image).
TECHNICIANS' manual
and wait for the hot water to be
again or press the
to start dispens-
6.11.2 Dispensing
Do not direct the steam towards hands or other
parts of the body. Do not touch the steam noz-
zles with bare hands; use the appropriate PPE.
• Immerse the automatic steam wand nozzle tips (1) into
the milk.
1
2
• Press the
Autosteamer
• Wait until the dispensing process has been completed.
• To stop dispensing ahead of time, press the same button
again.
Autosteamer
Keep the tips clean at all times using a cloth
dampened in lukewarm water. Milk can be kept
in the fridge for a maximum of 3-4 days.
6.11.3 Adjusting the temperature
To adjust the activation temperature of the automatic steam
wand, follow the instructions provided in paragraph "6.14.7
Programming the Automatic Steam Wand Temperature" on
page 45.
but-

6.12 Dispensing cappuccinos

• Put the suction tube in the milk.
• Place the jug under the spout of the
cappuccino maker.
• Open the steam valve and when the
desired amount has been obtained,
close the steam valve.
• Pour the frothed milk into the cups with
the coffee.
To obtain hot non-frothed
milk, lift the cappuccino maker
flap upwards. For better re-
sults, we suggest that you do not dis-
pense directly into the coffee cup, but
into a jug or pot, and then pour the
frothed milk on top the coffee.
Be sure to constantly keep the cappuccino maker clean,
by following the instructions provided in paragraph "7.5
Water softener regeneration" on page 51.
button (2).
41 108
of