Connecting To Safety Switching Devices Or F I/O Modules; General Structure; Figure 15: Potential Group For Safety Related Applications - WAGO 750-506 Series Manual

2do 24v dc 0.5a/ diagnostics, 2-channel digital output, 24 vdc, short-circuit, protected, high-side switching, with diagnostics

Hide thumbs

Table of Contents

Using Interference-Free Variants in Safety Related Applications WAGO I/O System 750

Pos : 74.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

Pos : 74.6 /Serie 750 (WAGO I/O SYSTEM)/Eins atz in sicherheitsg erichteten Anwendung en/Allgemeiner Aufbau ei ner Potentialgruppe - r üc kwir kungsfr eie Varianten @ 6\mod_1258973074755_21.doc x @ 44664 @ 23 @ 1

7.2

Connecting to Safety Switching Devices or

F I/O Modules

7.2.1

General Structure

When using the interference-free variant ".../xxx-8xx"of the I/O module 750-506

in safety related applications, the modules belonging to a safety switching device

shall be combined to form a potential group. Power to the potential group shall be

supplied via a power supply module 750-601 or 750-602 or via filter module

750-626. Either a power supply module or a separation module without power

jumper contacts (750-616) must be connected at the end of the potential group.

Pos : 74.7 /Serie 750 (WAGO I/O SYSTEM)/Eins atz in sicherheitsg erichteten Anwendung en/Aufbau einer Potenti algruppe @ 6\mod_1259221280455_21.doc x @ 45332 @ @ 1