Connecting The Io Module To Safety Switching Devices Or Safety Modules; General Structure; Figure 15: Potential Group For Safety Related Applications - WAGO -I/O-SYSTEM 750 Manual

34 Using Interference-Free Variations of I/O Modules in Safety Related ApplicationsWAGO-I/O-SYSTEM 750
Po s: 77.6 /Serie 750 (WAGO-I/O-SYSTEM)/Einsatz in sicherheitsgerichteten Anwendungen/Allgemeiner Aufbau einer Potentialgruppe - rückwirkungsfreie Varianten @ 6\mod_1258973074755_21.doc @ 44664 @ 23 @ 1
7.2 Connecting the IO Module to Safety Switching
Devices or Safety Modules
7.2.1

General Structure

When using the interference-free variation ".../8xx-xxx"of the IO module 750-
502 in safety related applications, the modules belonging to a safety switching
device shall be combined to form a potential group. Power to the potential group
shall be supplied via a power supply module 750-601 or 750-602 or via filter
module 750-626. Either a power supply module or a separation module without
power jumper contacts (750-616) must be connected at the end of the potential
group.
Po s: 77.7 /Serie 750 (WAGO-I/O-SYSTEM)/Einsatz in sicherheitsgerichteten Anwendungen/Aufbau einer Potentialgruppe @ 6\mod_1259221280455_21.doc @ 45332 @ @ 1
Safety switch module/
Safety module
Supply module
1
24 V
2
0 V
3
PE

Figure 15: Potential group for safety related applications

Po s: 78 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
Output modules
in safety related applications
1 5 1 5
D01 D02 D01 D02
4 2 6 2 6
24 V 24 V
5 3 7 3 7
0 V 0 V
6 4 8 4 8
PE PE
Potential group
for safety related applications
750-502 2DO 24V DC 2.0A
Supply
module
1 5 1 5
D01 D02 D01 D02
2 6 2 6 1
24 V 24 V
3 7 3 7 2
0 V 0 V
4 8 4 8 3
D03 D04 D03 D04
Separation
or
module
4
24 V
5
0 V
6
PE
750-616
Further
potential group
Manual
Version 1.2.0