13503Bios.com U Tility - Epson S1D13503 Series Technical Manual

Dot matrix graphics lcd controller
Hide thumbs Also See for S1D13503 Series:
Table of Contents

Advertisement

3 13503BIOS.COM U
13503BIOS is a Terminate and Stay Resident (TSR) program which replaces and/or supplements the
PC video interrupt INT 10h. This program provides text, scroll, and cursor functionality when no
VGA BIOS is present. Although the S1D13503 is not a VGA or EGA compatible controller, this
program is supplied to give the user a familiar prompt. Within limits 13503BIOS simulates a VGA
BIOS and will allow standard output functions to work. DOS programs such as Edlin, Format,
Debug, and internal commands such as Copy, Ren, Mkdir, etc., should work. However, complex
programs such as Edit, Qbasic, and Scandisk will not work. The standard output functions are han-
dled by the VGA BIOS, if present.
Program Requirements
Video Controller
Display Type
BIOS
DOS Program
DOS Version
Windows Program
Windows DOS Box
Windows DOS Full Screen
OS/2 DOS Full Screen
Installation
Copy the files 13503bios.com and 13503bios.ini from the distribution disk to a directory on your
hard drive that is in your DOS path.
Usage
13503BIOS.COM is run from the DOS command line.
The file 13503bios.ini is the initialization file for 13503bios.com and must reside in the same direc-
tory as 13503bios.com. This file contains the default run parameters for 13503bios.com. These
parameters may be changed within the initialization file or for one time usage on the command line
as follows:
13503bios t=n x=n y=n d=n g=n i=n m=n p=n [f=n] [/?]
Where: t
is panel drive type: single or dual.
x
is the horizontal panel size in pixels (decimal).
y
is the vertical panel size in lines (decimal).
d
is panel type: color or mono.
g
is the number of colors/gray shades: 2, 4, 16 or 256.
i
is the panel interface data width: 4, 8 or 16 bits.
p
is the port address in hex: 300|310...360|370.
m
is the memory size in K bytes: 64 or 128.
f
is the 8-bit color panel format: 1 or 2.
/?
produces a usage message.
Note that the port address must be the same as the physical address set on the S5U13503P00C eval-
uation board.
Example:
13503BIOS t=single x=320 y=240 d=color g=256 i=8 p=310 m=128 f=2
S18A-B-003-01
TILITY
: S1D13503
: Up to 640 × 480 LCD
: None or any VGA
: Yes
: 3.0 or greater
: No
: Yes
: Yes
: Yes
13503BIOS.COM Utility
3-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

S1d13503d00aS1d13503f00aS1d13503f01aS1d13503p00c

Table of Contents