Operator Help When Starting; Operator Help Workmode - Fayat Group DYNAPAC CC224HF Instruction Manual

Machine description

Operator help when starting

When trying to start the machine without having set
one, two or three of the conditions required to start
machine, the missing conditions are shown in the
display.
The missing conditions must be set before it is
possible to start the machine.
Conditions that must be set:
- Activated P-brake
- Selector lever in neutral
- Speed selector for diesel engine in low (Low = idling)
(not all models)

Operator help Workmode

When attempting to activate
- Vibration
- Offset control (Option)
- Edge cutter/compactor (Option)
with the machine in Transport mode the display will
show "Workmode" for a few seconds.
To activate the above functions it is necessary to
make sure that the machine's Workmode is activated.
2021-01-14 4812159601_H.pdf
55