Steering Hitch - Tightening; Cab; Fresh Air Filter - Replacing - Fayat Group DYNAPAC CC224HF Instruction Manual

Fig. Steering hitch
1. Nut
2
1
Fig. Cab, front
1. Fresh air filter (x1)
2. Screw (x2)
2021-01-14

Steering hitch - Tightening

Nobody must be allowed near the steering joint Nobody must be allowed near the steering joint
when the engine is running. Risk of being when the engine is running. Risk of being
crushed when the steering is operated. Switch crushed when the steering is operated. Switch
off the engine and activate the parking brake off the engine and activate the parking brake
1
before lubricating. before lubricating.
The easiest way to identify if you have this type of
steering hitch is that it has a new type of nut (1) at the
top, as shown.
Actual torque (Nm) should be when the machine's
position is straight ahead.
M14 M14
M16 M16

Cab

Fresh air filter - Replacing

There is one fresh air filter (1), placed on the front of
the cab.
Remove the protective cover.
Undo the screws (2) and remove the complete holder.
Remove the filter insert and replace with a new filter.
2
The filter may need to be changed more often if the
machine is operated in a dusty environment.
4812159601_H.pdf
Maintenance - 2000h
174 Nm 174 Nm
270 Nm 270 Nm
159