Engine; Replacing Oil Filter; Hydraulic Fluid Cooler Checking - Cleaning - Fayat Group DYNAPAC CC224HF Instruction Manual

Fig. Engine compartment, right side
1. Oil filter
2. Dipstick
3
1
Figure. Cooler
1. Charge air cooler
2. Water cooler
3. Hydraulic fluid cooler
4. Cooler grill
122
2
1
2
4
4812159601_H.pdf

Engine

Replacing oil filter

Check the dipstick (2) to ensure that the engine oil
level is correct. Refer to the engine manual for details.
The oil filter (1) can be accessed via the right engine
compartment door.
See the engine manual for information about replacing
the filter.
Hydraulic fluid cooler
Checking - Cleaning
The water and hydraulic fluid coolers are accessible
when the cooler grill (4) is removed.
Make sure that the air flow through the cooler is
unobstructed. Dirty coolers are blown clean with
compressed air or washed clean using a
high-pressure water cleaner.
Take care when using a high-pressure water jet. Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler. Do not hold the nozzle too near the cooler.
Wear protective goggles when working with Wear protective goggles when working with
compressed air or high-pressure water jets. compressed air or high-pressure water jets.
Maintenance - 250h
2021-01-14