Table of Contents
Advertisement
2021-01-14
Introduction
The machine
Dynapac CC224HF/324HF/384HF,
CC2200/3200/3800 are models of vibratory tandem
rollers in 8/8/9.5 metric tonnes class featuring
1500/1730/1730 mm (59/68/68 in) wide drums. The
machines are equipped with drive, brakes, vibration
and timer for water sprinkler on both drums.
CC224HF/324HF, CC2200/3200 is also available as
Combi with four rubber wheels at rear replacing the
steel drum.
A variety of different engine power settings, operator
platforms, control possibilities and options makes the
machine available in a lot of different configurations.
Intended use
The machine is mainly designed to be used for thin
and thick asphalt layers with regards to dual vibration
amplitudes that are optimized for this purpose. It is
also possible to compact granular soil material, such
as sand and gravel.
Signal symbols and meaning
WARNING ! Indicates potential hazardous
WARNING ! Indicates potential hazardous
situation/procedure which, if not avoided, could
situation/procedure which, if not avoided, could
result in death or serious injury.
result in death or serious injury.
CAUTION ! Indicates potential hazardous
CAUTION ! Indicates potential hazardous
situation/procedure which, if not avoided, could
situation/procedure which, if not avoided, could
result in minor or moderate injury, damage to
result in minor or moderate injury, damage to
the machine or property.
the machine or property.
Safety information
It is recommended to at least train operators in
It is recommended to at least train operators in
handling and daily maintenance of the machine
handling and daily maintenance of the machine
in accordance with the instruction manual.
in accordance with the instruction manual.
Passengers are not allowed on the machine, and
Passengers are not allowed on the machine, and
you must sit in the seat when operating the
you must sit in the seat when operating the
machine.
machine.
The safety manual supplied with the machine
The safety manual supplied with the machine
must be read by all roller operators. Always
must be read by all roller operators. Always
follow the safety instructions. Do not remove
follow the safety instructions. Do not remove
the manual from the machine.
the manual from the machine.
4812159601_H.pdf
Introduction
1
Hide quick links:
Advertisement
Table of Contents
