Fayat Group DYNAPAC CC224HF Instruction Manual page 53

No No Designation Designation
24 24 Rpm switch, diesel engine Rpm switch, diesel engine
25 25 Parking brake Parking brake
26 26 Hazard warning lights Hazard warning lights
27 27 Rotating beacon Rotating beacon
28 28 Gravel spreader Gravel spreader
29 29 Gear position switch Gear position switch
2021-01-14
Symbol Symbol Function Function
Three-position switch for idling (LO), intermediate speed (MID) Three-position switch for idling (LO), intermediate speed (MID)
and working speed (HI). and working speed (HI).
NOTE: The lever must be in neutral (LO) when starting the NOTE: The lever must be in neutral (LO) when starting the
machine. The engine also runs at low speed when stationary, machine. The engine also runs at low speed when stationary,
more than approx. 10 seconds if the F&R lever is in neutral. more than approx. 10 seconds if the F&R lever is in neutral.
If the F&R lever is moved out of neutral the speed will If the F&R lever is moved out of neutral the speed will
increase to the set speed again. If the machine has a fuel increase to the set speed again. If the machine has a fuel
optimization system, MID is replaced by ECO (and the switch optimization system, MID is replaced by ECO (and the switch
is green). is green).
When pressed, the parking brake is activated. When pressed, the parking brake is activated.
To release the brakes, slide the red part back (towards you) To release the brakes, slide the red part back (towards you)
and change the position of the lever. and change the position of the lever.
NOTE: When starting the machine, the parking brake must NOTE: When starting the machine, the parking brake must
be activated. be activated.
To activate the brakes, press the top of the switch to change To activate the brakes, press the top of the switch to change
the position of the lever. the position of the lever.
To release the brakes, press down the red part at the same To release the brakes, press down the red part at the same
time as the switch and change the position of the lever. time as the switch and change the position of the lever.
NOTE: When starting the machine, the parking brake must NOTE: When starting the machine, the parking brake must
be activated. be activated.
Activate the hazard warning light by depressing the button. Activate the hazard warning light by depressing the button.
Activate the rotating beacon by depressing the button. Activate the rotating beacon by depressing the button.
Activating the gravel spreader. Manual/Automatic spreading. Activating the gravel spreader. Manual/Automatic spreading.
(CC224-324, CC2200-3200) (CC224-324, CC2200-3200)
Activates the three different gear positions: (1), (2), (3). The Activates the three different gear positions: (1), (2), (3). The
current gear position is shown in the display by means of the current gear position is shown in the display by means of the
following figures. following figures.
Position 1: Used for maximum hill-climbing capacity during Position 1: Used for maximum hill-climbing capacity during
vibratory compaction vibratory compaction
Position 2: Normal position Position 2: Normal position
4812159601_H.pdf
Machine description
41