Edge Cutter (Optional) - Lubrication - Fayat Group DYNAPAC CC224HF Instruction Manual

2
1
Figure. Two grease points for
lubricating the edge cutter
2021-01-14
Edge cutter (Optional)
- Lubrication
Refer to the operation section for information on Refer to the operation section for information on
how to operate the edge cutter. how to operate the edge cutter.
Grease the two points as shown in the figure.
Grease should always be used for lubrication, see the
lubricant specifications.
Grease all bearing points with five strokes of a
hand-operated grease gun.
4812159601_H.pdf
Maintenance - 500h
133