Heat Pump, (Hp), Mounting Instructions For Pro-Vhr Conveyors - Champion 64 PRO Series Installation Manual

Heat Pump, (HP), Mounting Instructions
for PRO-VHR Rack Conveyor Dishwashers
CAUTION:
The HP weighs 300 lbs./136 kg. Use 4 people to lift.
Fasteners:
(18) 1/4-20 x 1/2" Hex Hd. Bolts, P/N 100734
(18) 1/4" Split Lock Washers, P/N 106482
(18) 1/4" Flat Washers, P/N 106026
Perform steps below to mount the HP:
Step 1:
Remove the panels, (yellow outline),
before lifting.
Step 2:
Place the HP on dishwasher, (red outline).
Secure using supplied fasteners.
Step 3:
Install quick connect plug on top of machine
behind fan (Fig. 2).
Step 4:
Install compressor cable bracket on back
of machine below the HP. (Fig. 3).
Step 5:
Plug compressor cable into front of
compressor behind the insulation (Fig. 4).
Step 6:
Reinstall panels. Mounting complete.
Fig. 2 - Quick Connect Plug
Fig. 3 - Compressor Cable Bracket
Installation: Mounting The Heat Pump, HP, on the VHR Machine
STOP!
Fig. 4 - Compressor Cable Plug
1
4
Fig.1
Do not lift the heat pump by the
copper piping on the back of the unit.
Doing so will permanently damage the
unit and void the warranty.
3
5
2
P/N 117276 rev. A
5