Champion 64 PRO Series Installation Manual page 28

Installation
Electrical Connections -
To convert a 1-point connection to a 2-point connection.
1.
Open the control cabinet and remove the jumpers, (Fig. 22), between 'Dishwasher'
terminal block and the 'Booster' terminal block.
2.
Cover the existing 1-point connection data plate, (Fig. 23), with the 2-point connection
data plate, (Fig. 24), stowed in the plastic bag, (Fig. 25), next to the input terminal
block.
3.
Connect the incoming power according to the customer's requirements.
4.
Conversion is complete.
Fig. 24 -
2-point connection data plates.
The 2-point data plate is located in a plastic bag next to the
20
Changing 1-Point to 2-Point
Electrical Connection
Fig. 25 -
terminal block.