Hot Water Coil Tank Heat, Air Purging Instructions - Champion E Series Installation/Operation With Service Replacement Parts

The air trapped in the Dishwasher Hot Water Recirculating Pump and Water Lines must be
purged. Refer to the illustration below and follow the procedure on the next page.
A
The air purge petcock is located behind the dishwasher
lower front panel at the booster end of the machine.
Purging Air from the Dishwasher/Booster Heater System
CAUTION:
PERMANENT DAMAGE to the hot water recirculating pump can
occur if the air is not purged from the dishwasher/booster heater
system prior to placing the dishwasher into service.
Follow the instructions on pages 9-10 to prevent damage to the
dishwasher hot water recirculating pump.
near the base at the booster end of the machine.
Hot Water Coil Tank Heat
The dishwasher recirculating pump is located
Installation
B
11