Canon imageFORMULA DR-X10C User Manual page 72

Verify Scan
The scanner compares the document page count obtained from the
Count-Only mode (or entered manually) with the actual count of
document pages scanned, and an error message is displayed if the
counts do not match.
1
Setting the Count.
Hint
The document page count can be specified by using the count
obtained from the Count-Only mode or by pressing the [
[ ] keys to enter a number.
2
Select Verify Count in the ISIS/TWAIN driver settings.
3
Press the Start Key to start scanning.
"Verifying..." is displayed.
Hint
If the specified count is exceeded while scanning, or if the
scanned count does not reach the specified count when
scanning is finished, an error is displayed.
The specified count is exceeded while scanning
Scanning finishes without reaching the specified count
] and
Double-Feed Detection Function
The scanner can detect double feeds. Two detection methods are
used: comparison of document lengths, and ultrasonic detection of
spacing between documents, which is set in the ISIS/TWAIN driver.
72