Document Feed And Eject Trays; Preparing The Document Feed Tray - Canon imageFormula DR-9050C User Manual

3.

Document Feed and Eject Trays

Before scanning, prepare the Document Feed and Eject Trays for the desired paper size.

Preparing the Document Feed Tray

■ Document Feed Tray
The height of the Document Feed Tray can be adjusted
according to the number of document pages to be loaded
(the default setting is the lowest position).
Tray Position Setting
The height of the Document Feed Tray is set by the Tray
Position in the User Mode setting, which minimizes the
time required to start feeding by specifying in advance the
proper position for the documents to be loaded.
1.
Press the Menu key on the control panel.
The User Mode is activated.
2.
Press the [ ] key five times to display Tray Position.
(See p. 4-8.)
3.
Confirm your settings.
For the DR-6050C
[0]: To load up to 300 sheets
[1]: To load up to 100 sheets
For the DR-7550C/9050C
[0]: To load up to 500 sheets
[1]: To load up to 300 sheets
[2]: To load up to 100 sheets
3-6
Chapter 3 Basic Operation
Menu Key