Cleaning The Glass And Rollers - Canon imageFORMULA DR-X10C User Manual

Cleaning the Scanner Exterior
To clean the outside of the scanner, use a cloth dampened with water
or mild detergent solution. Wring out the cloth thoroughly, and use a
clean dry cloth to wipe the scanner dry.
Cleaning the Document Feed Inlet and
Transport Path
Dust or paper particles in the document feed inlet or inside the
scanner can cause spots to appear in scanned images. Use
compressed air to periodically clean dust and paper particles from the
inlet and the inside of the scanner. After completing large scanning
jobs, turn OFF the scanner and clean out any paper particles.

Cleaning the Glass and Rollers

If scanned images contain spots or documents become dirty after
scanning, the scanning glass or transport rollers inside the scanner
may be dirty.
The locations of the main glass and rollers are as follows.
For instructions on cleaning the glass and rollers, refer to the following
pages.
• Scanning Glass and Sensor Glass
p. 89)
• Platen Rollers (See "Cleaning the Platen Rollers" on p. 90)
• Pickup and Feed Rollers
Rollers" on p. 92)
• Retard Roller (See "Cleaning the Retard Roller" on p. 96)
85
Pickup Rollers
Feed Rollers
Platen Roller
Scanning Glass
Platen Roller
Scanning Glass
Sensor Glass
Retard Rollers
(See "Cleaning the Glass" on
(See "Cleaning the Pickup and Feed