About The Auto Power Off Function - Canon imageFORMULA DR-X10C User Manual

2
Press the [ ] key five times to display "Auto USB PWR
OFF". (See p. 77.)
3
Confirm your settings.
ON: When a USB cable is connected, the scanner's power
switches ON and OFF according to the computer's power
state.
OFF: The scanner's power turns ON and OFF by its power
switch.
4
Press [Enter].
Enter Key
The current setting is indicated by blinking square brackets [ ].
5
Press the [ ] or [
press [Enter] to accept the selection.
6
Press the Stop key to exit the User Mode.

About the Auto Power OFF Function

This scanner includes an Auto Power OFF function. When this
function is enabled, the scanner will turn OFF automatically if no
operations are performed for 4 hours.
The Auto Power OFF function can be configured in the User Mode.
(See "User Mode" on p. 77.)
Hint
Depending on your country or region, the Auto Power OFF function
may be enabled under factory default conditions.
34
] key to select [ON] or [OFF], and