Canon imageFORMULA DR-X10C User Manual page 10

STEP 3
System requirements
To use the DR-X10C, your computer must satisfy the following system
requirements.
Operating system
• Microsoft Windows 7 Service Pack 1 or later (32-bit and 64-bit
editions)
• Microsoft Windows 8.1 (32-bit and 64-bit editions)
• Microsoft Windows 10 (32-bit and 64-bit editions)
• Microsoft Windows Server 2008 R2 Service Pack 1 or later
• Microsoft Windows Server 2012 R2
• Microsoft Windows Server 2016
• Microsoft Windows Server 2019
This is the environment as of March 2019.
For the latest software support information, go to the Products page
on the Canon website.
Computer specifications
CPU: Pentium 4, 3.2GHz or faster
Memory: 1 GB or more
Hard disk: 1 GB or more available space
CD-ROM drive
Interface: One standard Hi-Speed USB 2.0 port on the
PC, or a SCSI expansion card
Monitor: Resolution of 1024 × 768 (XGA) or better
recommended.
Recommended SCSI Cards
SCSI cards made by Adaptec (for PCI bus)
• AHA-2930U
Installing the Software
• AHA-2940AU
• ASC-19160
• ASC-29160N
SCSI card made by Adaptec (for Card bus)
• APA-1480
An ISIS-compatible application or a TWAIN-compatible
application that is compatible with the above operating
systems.
IMPORTANT
• If you do not know the requirements for your computer system,
contact the store where you purchased the computer or the
manufacturer of the computer for more information.
• Do not connect both a USB interface and a SCSI card at the same
time.
• Note the following points when using the USB interface that was
provided with your computer.
– The USB connection should be a Hi-Speed USB 2.0 interface.
– Scanning speeds are lower if your computer's standard USB
interface is USB Full-Speed (equal to USB 1.1).
– Use the most recently available USB 2.0 driver provided by
Microsoft. Contact your local authorized Canon dealer for more
detailed information.
– Not all USB interfaces provided as standard with personal
computers are guaranteed. Contact your local authorized Canon
dealer for more detailed information.
– Use the USB cable that was originally bundled with the scanner
or a Hi-Speed USB 2.0 compatible cable.
• Note the following when using a SCSI card.
– Make sure to follow the procedure in the manual for the SCSI card
and the computer that you are using when installing a SCSI card
in your computer.
10