Canon imageFORMULA DR-X10C User Manual page 83

Auto USB Power Switch Setting
When this setting is set to [ON], and a USB cable is connected, the
scanner is turned ON and OFF by the computer's power switch.
"About the Power Switch" on p. 33.)
ON: The scanner automatically turns ON and OFF when the computer
is turned ON and OFF.
OFF: The scanner's power state is not affected by the computer's
power state.
Total Counter
Displays the lifetime total number of document pages fed by the
scanner.
Roller Counter
Displays the number of document pages fed since roller installation or
replacement (pickup, feed, and retard rollers). Make sure to reset this
counter when replacing the rollers.
Page Counter" on p. 100.)
(See
(See "Checking and Resetting the
Imprinter Test
When the optional imprinter is installed, this function executes a test
printing of the imprinter. (See "Performing an Imprinter Test" on
p. 110.)
Cleaning Mode
This function executes roller cleaning using a cleaning sheet.
"Cleaning Rollers with a Cleaning Sheet" on p. 86.)
83
(See