Canon imageFORMULA DR-X10C User Manual page 7

STEP 2
Install the supplied pickup roller and feed roller in the scanner.
IMPORTANT
• The pickup roller and feed roller are installed in the following
locations after opening the upper unit.
Pickup Roller
Feed Roller
• Be sure to install the pickup roller and feed roller, as documents will
not feed if the rollers are not installed.
1
Press the Open/Close button, and carefully raise the
upper unit until it stops.
Open/Close Button
Installing the Rollers
2
Hold the roller cover as shown, and lower it toward you.
Do not hold the glass portion when opening and closing the roller
cover.
3
Set the pickup roller (A) in place, and push the mounting
lever (B) back to secure it.
7