Canon imageFORMULA DR-X10C User Manual page 61

3
On the [Others] tab of the ISIS driver properties, select
[Patchcode] from the Batch Separation drop-down list.
IMPORTANT
If the patchcode decoder is not installed, the [Patchcode] batch
separation setting is not displayed.
4
Perform [Scan Batch to File].
5
Set the [Type of batch separation] setting to [Scan,
Continue Scanning] or [Skip, Continue Scanning].
Hint
• If [Scan, Continue Scanning] is selected or if the patchcode is
PATCH ll type, the patchcode sheet image is also saved and
scanning continues.
• If [Skip, Continue Scanning] is selected and the PATCH T
pattern is detected, the patchcode sheet image is not saved
and scanning continues.
61