Canon imageFORMULA DR-X10C User Manual page 56

9
Specify the file name and the file type for saving the
image data.
For details on the available settings in the [Scan Batch to File]
dialog box, refer to the CapturePerfect 3.1 Operation Guide.
10
Place your document and click [Save] to start scanning.
IMPORTANT
You must load your documents as described below, depending
on the specified Feed Option setting.
• If the [Standard Feeding] Feed Option is enabled, load your
documents before scanning. When all of the documents have
been scanned, the Continue Scanning dialog box appears.
• If the [Manual Feeding] Feed Option is enabled, the Bypass
Mode key is lit and the Document Feed Tray is raised. You must
insert one page at a time to be scanned, and press the Stop
button to display the Continue Scanning dialog box.
Bypass Mode Key
• If a Feed Option other than [Standard Feeding] or [Manual
Feeding] is selected, once you have started scanning, each
document placed in the Document Feed Tray is scanned, and
when no document is loaded, the scanner enters the standby
state.
• If the [Automatic Feeding] Feed Option is enabled, scanning is
performed automatically whenever a sensor in the Document
Feed Tray detects a loaded document, and pressing the Stop
key causes the Continue Scanning dialog box to appear.
• If the [Panel-Feeding] Feed Option is enabled, the Start key
lamp is lit. You must load a document and press the Start key to
scan. Pressing the Stop button causes the Continue Scanning
dialog box to appear.
56