Moving The Scanner; Handling - Canon imageFORMULA DR-X10C User Manual

The power cord may become damaged if it is often stepped on or if
heavy objects are placed on it. Continued use of a damaged power
cord can lead to an accident, such as a fire or electrical shock.
Do not use the power cord while it is coiled.
Do not pull directly on the power cord. When disconnecting the
power cord, grasp the plug and remove it from the outlet.
Keep the area around the power plug clear of objects so that the
power cord can be disconnected easily in an emergency.
If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.

Moving the Scanner

The scanner weights about 86 lbs (39 kg).
To lift or move the scanner, always use two people, one on each
side. Never attempt to lift the scanner by yourself. You could drop
the scanner or pinch your fingers, resulting in personal injury or
damage to the scanner. Remember to be extra careful when
moving it.
Make sure to disconnect the interface cable and power cord when
moving the scanner. If the scanner is carried with these items
connected, the plugs and connectors may be damaged or cause
the scanner to fall and result in personal injury or damage to the
scanner.

Handling

WARNING
Note the following precautions whenever using the scanner. Failure to
do so may result in a fire or electric shock.
Never use alcohol, benzene, paint thinner, aerosol sprays, or any
other highly flammable substance near the scanner.
Do not cut, damage, or modify the power cord. Do not place heavy
objects on the power cord, and do not pull or excessively bend the
power cord.
Never connect the power cord when your hands are wet.
Do not connect the scanner to a multiplug power strip.
Do not knot or coil the power cord, as this may result in a fire or
electric shock. When connecting the power cord, make sure that the
power plug is securely and completely inserted into the power
outlet.
To use a reel-type extension cord, unwind all of the cord from the
reel. Long-term operation with the cord wound on the reel may
cause the cord to overheat and could cause a fire.
Do not use power cords other than the power cord provided with this
scanner. Do not use the supplied power cord with other products.
Never try to take the scanner apart or modify it in any way, as this
is dangerous and may lead to a fire or electric shock.
Do not use flammable aerosol sprays products near the scanner.
23