Canon imageFORMULA DR-X10C User Manual page 148

When you want to use batch separation
for scanning
When you want to divide and scan a document, you can separate a
batch at the timing with which each next document is placed and
scanned.(Only enabled for applications that support batch
separation.)In this case, set the scanner driver as follows.
• Set [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or
[Automatic Feeding].
• Set [Batch Separation] on the [Others] tab to [Auto].
When [Batch Separation] is set to [Auto], the batch is separated after
the next document is placed and scanning is continued.
For more details about [Blank Page] and [Patchcode],
Separation" (See p. 58)
When you want to use MultiStream
settings for scanning
Multi-stream allows you to output multiple different scanned images
with a single scan operation, and output scanned images with different
scanning conditions for each of the front and back pages (MultiStream
settings).
148
"Batch