Record Schedule Configuration - Speco N64NR24TB User Manual

NVR User Manual
Record & Disk Management
Click "All" to set all day recording; click "Reverse" to swap the selected and unselected time in a day; click "Clear All"
to clear all the selected area in a day.
Click "Copy To" to copy the schedule of the day to other days. Refer to the picture below. Check the days in the
window and then click "OK" to save the settings.
Set Week Schedule

Click or and then click "Manual" beside to set the week schedule. Refer to the picture below. Set the start
and end time, check the days in the window and then click "OK" to save the settings.
Click "All" to set all week recording; click "Reverse" to swap the selected and unselected time in a week; click "Clear
All" to clear all the selected area in a week.

7.3.2 Record Schedule Configuration

Click StartSettingsRecordRecord ScheduleSchedule Configuration to go to the interface as shown below. Set
the schedule of sensor record, motion record, timed record and intelligence record. Click "None" in the drop-down
menu to clear the schedule. Click "Apply" to save the settings.
41