Encode Parameters Setting; Schedule Setting; Add Schedule - Speco N32NRE User Manual

Record & Disk Management
Pre-alarm Record Time: set the time to record before the actual recording begins.
Post-alarm Record Time: set the time to record after the actual recording is finished.
Expiration Time: set the expiration time for recorded video. If the set date is overdue, the recorded data will be deleted automatically.

7.2 Encode Parameters Setting

Click StartàSettingsàRecordàEncode Parameters to go to the interface as shown below. Set the encode, resolution, FPS, GOP, bitrate type, quality,
max bitrate and audio of main stream for each camera in "Event Recording Settings" and "Schedule Recording Settings" interfaces. Click "Apply" to
save the settings. You can set the record stream of each camera one by one or batch set them for all cameras.
Click StartàSettingsàRecordàStream Settings to go to "Sub-stream" interface. Set the encode, resolution, FPS, GOP, bitrate type, quality and max
bitrate of sub-stream for each camera in the interface and then click "Apply" to save the settings.

7.3 Schedule Setting

7.3.1 Add Schedule

Click StartàSettingsàRecordàRecord ScheduleàEdit Schedules to go to the interface as shown below. "24
schedules; you cannot edit or delete "24
schedule information on the left side of the interface. The seven rows stand for the seven days in a week and each row stands for 24 hours in a day.
Blue stands for the selected time and gray stands for unselected time.
7" while "24 5" and "24 2" can be edited and deleted. Click the schedule name to display the detailed
ⅹ ⅹ ⅹ
39
NVR User Manual
7", "24 5" and "24 2" are the default
ⅹ ⅹ ⅹ