5.SoftwareControl-LightwareDeviceController
5.9.2. GPIO
TheGPIOporthas7pins,whichoperateatTTLdigitalsignallevelsandcanbecontrolledbyLDCorprotocol
commands.SelectaGPIOpinandunderthePortsettingssection;thesettings(pindirectionandinputlevel)
are displayed on the port tiles as well.
1
Gpio 1
2
3
4
*Theblack-highlightedsymbolmeansthecurrentsetting.
INFO:
OutputlevelcanbesetonlyincaseofsettingthepindirectiontoOutput.Incaseofinputdirection
theoutputlevelsettingandtheTogglebuttonisnotavailable.
FormoredetailsaboutGPIOinterfaceseetheGPIOInterface
6
1
P1
GPIOpinname
2
GPIOporticon
5
3
Lowlevelindicator*
4
Highlevelindicator*
5
Pindirection:
Input:downarrow
Output:uparrow
6
GPIOportnumber
section.
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
HDMI-TPS-TX200series–User'sManual
5.9.3. Ethernet
Ethernet Ports
ThreeportsaredisplayedintheEthernetsettings:Local,CPU,andTPS*.Youcancheckthestatusofthe
Ethernetlinebyeachports:thespeedandtheduplexityoftheconnection.
Thefollowingsettingsareavailableforeachports:
Enable/disabletheport;*
▪
Reloadingfactorydefaults.
▪
*CPUEthernetportcannotbedisabled.
ATTENTION!
SettingtheEthernetportdisabled may break the connection with the device.
Ports tab in the Control/Ethernet menu
49