Event Manager; The Event Editor - Lightware HDMI-TPS-TX226 User Manual

   
5.SoftwareControl-LightwareDeviceController
5.10. Event Manager
The feature means that the device can sense changes on its ports and able to
react according to the pre-defined settings. The development idea of the Event
manager is based on users' feedbacks. In many cases internal events (such as
signalpresentorHDCPactive)arenecessarytodisplaybutitisnoteasywhenthe
deviceishardtoaccess(e.g.builtunderthedesk).
TheEventmanagercanbeconfiguredtoperformanactionifaconditionhasbeendetected.E.g.thedesired
setupisthatafteracertaintypeofsignalhasbeendetectedonI1port,theporthastobeswitchedtoO1.
The settings can be done via the LDC in the Events menu, or by LW3 protocol commands. Configurable
eventsnumberdependsonthedevicewhatyouareusingactually.
Numerousnewideasandrequestshavebeenreceivedinconnectionwiththefeaturesandsettingsofthe
Eventmanagersincethefirstrelease.Therefore,theuserinterfacehasbeenre-designedandmanynew
functionsimplemented.TheEventeditorcanbeopenedbypressingtheEdit button at each Event.
There is a grey bar on the left of the Event panel in each line. If a condition and an action are set and the Event
is enabled, the bar is displayed in green.
Control menu, Event Manager tab
#eventmanager
HDMI-TPS-TX200series–User'sManual
5.10.1. The Event Editor
PresstheEdit button in the desired Event line to open the Event editor window.
1
2
3
4
1
2
3
4
5
6
7
8
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
5
Event header The name of the Event is displayed. Type the desired name and press the
Setnamebutton.TheEventcanbeclearedbytheClearbutton.Usethetick
marktoenable/disabletheEvent.
Condition header If the condition is set, the description (white colored text) and the exact
LW3protocolexpression(yellowcoloredtext)canbeseen.Iftheadvanced
modewasusedthedescriptionis"Customcondition".
Condition panel TheWizard,theAdvancedortheLinktoolisavailabletosetthecondition.
Theparametersandsettingsaredisplayedbelowthebuttons.
Condition Counter Thesetconditioncanbetestedtoseetheworkingmethodinthepractice.
Delay settings The action can be scheduled to follow the condition after the set time value.
Action header Iftheactionisset,thedescription(whitecoloredtext)andtheexactLW3
protocol expression (yellow colored text) can be seen. If the advanced
modewasusedthedescriptionis"Customaction".
Action panel TheWizard,theAdvancedortheLinktoolisavailabletosettheaction.The
parametersandsettingsaredisplayedbelowthebuttons.
Action test Thesetactioncanbetestedtoseetheworkingmethodinthepractice.
56
6
7
8