Video Outputs (Tps And Hdmi) - Lightware HDMI-TPS-TX226 User Manual

   
5.SoftwareControl-LightwareDeviceController
5.5.5. Video Outputs (TPS and HDMI)
Port Properties Window of the TPS Video Output
HDMI-TPS-TX200series–User'sManual
Available settings:
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
Setauniquenamefortheport(upto15characters).
Mute/unmuteandlock/unlocktheport.
Autoselect settings:enable/disable,mode,andpriorities.(SeemoredetailsaboutAutoselectfeaturein
The Autoselect Feature section). #signaltype
Signal type:Auto/DVI/HDMI-Theoutgoingsignalformatcanbeselectedbyadrop-downmenu.The
AutomodemeanstheoutgoingsignaltypeisbasedontheEDIDofthesinkconnectedtothegiven
outputport.IfHDMIissupportedbytheEDID,thesignaltypewillbeHDMI,otherwiseDVI.
HDCP mode:Auto/Always-Thetransmitterforcesthesourcesentthesignalwithoutencryptionifthe
content allows when Auto mode is selected.
Power 5V mode:Auto/Alwayson/Alwaysoff-Thesettingletsthesourceandthesinkdevicesbe
connected–independentlyfromthetransmittedsignal.
TPS mode:Auto/HDBaseT/Longreach/LPPF1/LPPF2.SeemoreinformationaboutTPSmodesin
the TPSInterface section. #tpsmode
#new
Connected source
No sync screen:configurationsettingsofthetestpattern.SeemoredetailsintheNoSyncScreen(Test
Pattern) section.
Open the Frame Detector.
Open the CableDiagnostics tool.
Reloadingfactorydefaultsettingsfortheselectedport.
42
#hdcp