Table of Contents
Advertisement
C
S
HECKING
TATUS OF
Checking in Windows
Double-click the printer icon
From the displayed window, check the column, [Status].
D
O
ISPLAYING
PTIONAL
When using this printer as a network printer and with SNMP protocol enabled, you can
display on the printer driver, the optional accessory configuration and settings configured
at the control panel such as paper type or size. These settings are displayed on the
[Options] tab. This section explains the procedure using Windows XP as an example.
Important:
>
When using USB or Parallel connection to this printer, this feature cannot be used.
You have to manually set the items on the printer driver.
>
The rear tray information cannot be obtained. You have to manually set the item.
>
For paper size and paper type settings, you must configure them at the control panel
beforehand. Even if you change the settings here, they will not be reflected on the
printer itself.
NOTE
>
When using this feature, you have to activate the SNMP port (default:
[Enable]) on the printer using the control panel.
>
For Windows NT 4. 0/Windows 2000/Windows2003/Windows XP and
Windows Vista, only users with administrator's rights can change the
settings. Users without administrator's rights can only check the contents.
1.
From the Start menu, click Printers and Faxes and then display the properties of
the printer to be used.
2.
Click the Device Options tab.
3.
Click Get Information from Printer.
NOTE
The properties of the printer can be displayed on the printer driver.
4.
Click OK. The contents of the Device Options tab will be updated based on the data
obtained from the printer.
P
D
RINT
ATA
on the task bar at the bottom right of the screen.
A
C
CCESSORY
Switching On and Off the Power > 13
ONFIGURATION AND
P
T
S
APER
RAY
ETTINGS
Advertisement
Table of Contents
