Chapter 2 Installation Procedures - FIC PA-2010 Manual

The PA-2010 has several user-adjustable jumpers on the board that allow you to
configure your system to suit your requirements. This chapter contains
information on the various jumper settings on your mainboard.
To set up your computer, you should follow these installation steps:
Step 1 -
Set system jumpers
Step 2 -
Install System RAM modules
Step 3 -
Install the CPU
Step 4 -
Install expansion cards
Step 5 -
Connect cables and power supply
Step 6 -
Set up BIOS feature (Please read Chapter Three.)
Installation Procedures
Chapter 2
11