Maquet ROTAFLOW User Manual page 28

3 Connection and Installation
| 28 |
1 Connect the inlet tube to the inlet in
the centre of the ROTAFLOW
Centrifugal Pump.
2 Connect the outlet tube to the outlet
on the side of the ROTAFLOW
Centrifugal Pump.
3 Apply ultrasonic contact cream to
both sides (left and right) around the
outlet of the ROTAFLOW Centrifugal
Pump. Both sides must be
completely covered with the
ultrasonic contact cream.
4 Insert the ROTAFLOW Centrifugal
Pump into the ROTAFLOW Drive.
Check that the ROTAFLOW
Centrifugal Pump is positioned under
the holder of the ROTAFLOW Drive.
5 Close the lock.
ROTAFLOW with ICU Kit | User's Manual | English | 1.0
Copyright MAQUET Cardiopulmonary AG, Hirrlingen
ROTAFLOW with ICU Kit
| |